Key takeaways
- Peak suction is the headline number; the 6-12KPa adjustable range is what a groomer actually uses, because the low end is where a nervous animal stays on the table.
- Not every customer needs the vacuum.
- Grooming hardware is the one category where quoting a single MOQ gets it wrong.
Grooming vacuums sell on a promise every importer recognises: trim the pet, collect the hair, nothing on the floor. What separates a reorder from a return is less visible — suction that survives the hose, noise a nervous animal tolerates, and a bin matched to the coat. These are the numbers worth checking before you commit to a run.
The 12000Pa kit, spec by spec
| Spec | Value |
|---|---|
| Peak suction | 12000Pa |
| Adjustable range | 6-12KPa |
| Motor power | 130-300W |
| Power supply | 110-240V |
| Dust capacity | 1.4L |
| Filter | H11 HEPA |
| Hose | 1.6m |
| Wholesale price | $25.90–$28.90 |
Peak suction is the headline number; the 6-12KPa adjustable range is what a groomer actually uses, because the low end is where a nervous animal stays on the table. Hose losses are real too, which is why airflow should be judged at the brush head rather than the base.
Three grooming classes, three buyer profiles
Not every customer needs the vacuum. Long-coat breeds and full-body trims are where the 12000Pa kit earns its price, collecting hair while it clips. Double-coated dogs after a bath belong with the 2000W blower dryer. The 9-in-1 combo kit — nail clipper, file, deshedding rake, comb and brushes — covers entry-level shelf space from $4.90.
Why grooming MOQ moves per SKU
Grooming hardware is the one category where quoting a single MOQ gets it wrong. The standard catalogue tier runs at 50 pieces per model with a 15-30 day lead time, but the 9-in-1 combo kit starts at 10 pieces while the 2000W blower dryer sits at 300 because of its motor cost. Private label on existing tooling starts at 1,000 pieces in 15-25 days; a new mould under ODM starts at 3,000 pieces at 30-45 days including tooling. Ask for the per-SKU figure in the first email.
Test the sample against the animal, not the datasheet
Set pass criteria before the sample ships: airflow at the brush head, and sound level in a quiet room with a noise-sensitive dog at the lowest suction setting. Noise, not suction, is what decides whether a grooming tool gets used at all — a unit that terrifies the pet goes back in the cupboard regardless of how well it collects hair. Check the replacement price of the H11 HEPA filter before the bulk order too, since filters are consumables your customers will need. Samples ship capped at a $30 fee, deductible in full from the first bulk order.
Before you place the order
What is the MOQ for pet grooming products? It depends on the SKU more than any other category. Vacuum kits and brush sets start at 50 pieces, the 9-in-1 combo kit at 10, and the 2000W blower dryer at 300 because of motor cost. Private label starts at 1,000 pieces; ODM with a new mould at 3,000 over 30-45 days including tooling.
How loud are the grooming vacuums in real use? The honest answer is that suction level drives the sound profile, so there is no single figure to publish. Test the lowest 6KPa setting first with a noise-sensitive pet, and set a one-metre sound-level pass criterion in a quiet room before the sample ships.
What warranty covers grooming hardware? Grooming hardware carries a 1-year warranty against manufacturing defects — motor, control board and suction mechanism. Filters, blades and brushes are consumables; confirm they stay stocked as spares, because accessory availability decides whether a fault becomes a return or a five-minute fix.
